Product Description:

The P5-11-025-A1-00-010000 is a Mid-Flex power servo cable produced by Kollmorgen within the Kollmorgen Servo Cables series. It transfers three-phase power from a drive controller to a servomotor while tolerating continuous motion inside industrial automation equipment. By combining a PVC outer jacket with strain-relieved SpeedTec terminations, the cable supports quick installation and maintains consistent electrical delivery during repetitive flex cycles.

The cable is designed to withstand repeated movement in dynamic applications. During operation, it may bend to a dynamic radius of 72 mm, while a static installation permits a minimum bend radius of 48 mm without crimping the jacket. A circular outside diameter of 12.0 mm keeps routing paths compact in energy chains and cable trays. The supplied length is 10 m, allowing the cable to span typical cabinet-to-motor distances with a single run. Power is carried on copper conductors with a cross-sectional area of 2.5 mm², providing capacity for the current associated with compatible Kollmorgen low-voltage servo drives. Life-test data show that the assembly endured an acceleration of 5 m/s², a travel distance of 80 m, and a velocity of 10 m/s. The PVC jacket also provides oil resistance for use in factory environments where lubricants may contact exposed cable surfaces.

Electrical and thermal limits include a maximum system voltage of 1000 V and a continuous conductor temperature rating of 80 °C. The cable has an average mass of 0.233 kg/m, which helps limit the mechanical load placed on festoon and carrier systems during movement. At the motor end, the premolded connector uses an industry-standard M23 SpeedTec layout with nine power and grounding contacts secured by a quarter-turn bayonet connection. This locking method provides a secure connection while allowing the motor cable to be installed without lengthy connector threading.