Product Description:

The P1-12-025-A1-00-003000 is a preassembled servo power cable produced by Kollmorgen and supplied under the Kollmorgen Servo Cables series. It links a drive amplifier to a matched motor so that phase power, protective ground, and shielding follow a controlled path, minimizing voltage drop and electromagnetic emissions in industrial automation systems. The cable delivers power through its molded assemblies and mates securely to the motor, supporting quick installation in gantries, pick-and-place arms, and packaging axes.

Its overall length is 3000 mm, providing sufficient reach for medium-sized machines without excess slack. Inside the jacket, four conductors each have a 2.5 mm² cross section, resulting in a 4 × 2.5 mm² conductor arrangement that supports a permissible continuous load of 17.4 A. The cable has a rated system voltage of 1000 V, making it suitable for compatible servo power circuits. Its insulation supports a power-frequency test voltage of 4 kV. An outer diameter of 12 mm helps the cable fit within servo cable carriers while allowing the braided shield to enclose the conductor bundle and reduce radiated electrical noise. The orange RAL 2003 jacket distinguishes the motor power cable from control wiring inside the cabinet.

Insulation resistance is rated at 20 MΩ × km, which limits leakage current across extended cable runs. The sheath is made of PUR, providing resistance to oil and repeated flexing in moving applications. The shield consists of a tinned copper braid that maintains a low-impedance ground path along the full cable length. With a mass of 220 kg/km, the cable contributes a predictable load when installed in a moving cable carrier. The molded M23 SpeedTec plug contains nine pins for three motor phases, protective ground, and sense conductors. The assembly does not include brake leads, so a separate connection is required when the motor uses a holding brake.