M.1302.8616 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen M.1302.8616 servo cable is part of the Kollmorgen Servo Cables series. This Hi-Flex cable is 15 meters long with a 15-pin HD D-Sub male angled drive connector and a straight motor connector. It is compatible with AKM and DDR motors, has a conductor setup of 7 pair 28 AWG, 1 pair 16 AWG, and 1 pair 22 AWG, and supports feedback interfaces like EnDat and BiSS with a sine-encoder feedback type.
Internal Product Review
The M.1302.8616 is a Kollmorgen servo cable for AKM/DDR motor applications. Hi-Flex cable grade and an angled 15-pin HD D-Sub male drive connector support dependable installation in dynamic servo layouts. Strong fit for motion-control assemblies where cable flexibility is a key requirement.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The M.1302.8616 servo feedback cable is supplied by Kollmorgen and belongs to the Kollmorgen Servo Cables series. It links AKM or DDR motors to compatible drives, carrying both encoder signals and auxiliary power so the motion controller can monitor shaft position and adjust torque in real time. As a preassembled assembly, the cable simplifies installation in automated machinery and maintains signal integrity between the motor feedback device and the drive’s F1 or F2 port.
The assembly is factory-cut to a length of 15 m, permitting direct routing from cabinet to motor without intermediate junction boxes. Inside the jacket, conductors follow a 7 Pair 28 AWG + 1 Pair 16 AWG + 1 Pair 22 AWG layout; this mix balances low-level encoder lines with heavier auxiliary power leads. On the drive end an industry standard 15-Pin HD D-Sub Male plug is fitted, and the hardware is positioned at a Angled orientation so that cables exit parallel to the drive face, conserving depth in narrow cabinets. The molded backshell mates to the drive’s F1/F2 connector pair, ensuring keyed engagement and positive latching under vibration.
A Hi-Flex outer jacket withstands continuous motion in cable tracks and carries a minimum bend radius of 12x Cable Diameter, preventing impedance drift when cycled millions of times. Differential signals pass through an EnDat/BiSS compatible channel, and the internal core wiring supports a Sine-Encoder feedback device without external adapters. Straight molding on the motor-side connector aligns with the axial receptacle used on AKM and DDR frames, keeping strain relief in line with the motor housing. Combined with the straight style, the cable grade and pair configuration maintain consistent attenuation, which is essential for high-resolution interpolation at the controller.
