Product Description:

The F1-10-FB2-A2-00-003000 is a factory-terminated servo feedback cable produced by Kollmorgen for the Kollmorgen Servo Cables series. The assembly links a resolver-equipped motor to its matching drive, transmitting position signals and low-level power while maintaining shield integrity along the motion axis. With a dual-ended harness that mates directly to the motor’s M23 SpeedTec connector and the drive’s D-Sub interface, it simplifies field wiring inside automated cells, reduces installation time, and provides reliable feedback for precise closed-loop control in packaging lines, conveyors, and general industrial machinery.

The cable is supplied in a fixed length of 3000 mm, providing a predictable routing distance between the cabinet and machine frame. Its core is built from a stranded bundle organized in an eight-conductor layout, so resolver excitation, sine-cosine returns, and the shield drain each have dedicated paths that minimize crosstalk. At the drive end, a 15-pin D-Sub plug is molded at a 45° exit angle, allowing dense stacking of connectors on the controller backplane without exceeding bend limits. Signal transmission is optimized for a resolver interface, matching the impedance and noise immunity requirements typical of Kollmorgen AKD and S700 drives.

Mechanical service life is supported by a dynamic bend radius of 45 mm, while stationary cable trays may follow a tighter 30 mm static curve without causing conductor fatigue. A rugged PUR outer jacket resists cutting fluids and abrasion while keeping the overall outside diameter to 7.5 mm, so cable bundles remain compact inside energy chains. The cable has a mass of 0.067 kg/m, reducing drag on fast-moving axes and simplifying cable carrier selection. The assembly terminates in a keyed 12-pin M23 SpeedTec plug at the motor side, and its dual-connector design maintains full 360° braid termination for electromagnetic compatibility across the entire run.