ENDAT-AKM-030M-MCS-DCA-28-NA Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
MPN: M.1302.8609
The Kollmorgen ENDAT-AKM-030M-MCS-DCA-28-NA is part of the Kollmorgen Servo Cables series and has a cable length of 30 meters. This static cable features a straight M23 motor connector with IP66/67 protection when plugged and supports a maximum current of 9 Amps at 125 Volts AC or DC. It is equipped with a 15-pin HD male D-Sub drive connector angled at 45 degrees and supports EnDat/BiSS feedback interfaces.
Internal Product Review
The ENDAT-AKM-030M-MCS-DCA-28-NA is a Kollmorgen servo cable configured for static installation and EnDat/BiSS feedback service. A 15-Pin HD Male D-Sub drive connector with a 45° angle supports tidy panel routing and clean termination. IP66/67 motor connector protection when plugged is a strong advantage for dependable machine-side connectivity.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ENDAT-AKM-030M-MCS-DCA-28-NA cable is manufactured by Kollmorgen and belongs to the Kollmorgen Servo Cables series. It serves as the dedicated power and signal link between an AKM rotary servo motor and its matched SERVOSTAR drive controller in automated machinery. By housing motor phases, encoder lines, and protective earth in a single sheath, the assembly reduces installation time and maintains consistent impedance, supporting precise axis control in pick-and-place equipment, packaging stations, and general motion platforms.
The cable has a static installation rating, meaning the outer jacket is formulated for minimal flex cycles rather than continuous drag-chain movement. Its overall length of 30 m allows the controller cabinet to be placed away from the moving machine frame without requiring a splice. Power is routed through a 1 × 16 AWG conductor, while signal integrity is maintained by twisted pairs arranged as 7 × 28 AWG plus a dedicated 1 × 22 AWG feedback pair; this conductor arrangement balances current capacity with low crosstalk. At the drive end, a 15-pin HD male D-Sub connector uses a 45° hood angle to minimize cabinet depth and strain on the receptacle. It carries differential clock and data lines compatible with the EnDat/BiSS serial interface.
On the motor side, the cable terminates in an M23 metal circular connector with a straight strain-relief body. The insert provides 17 gold-plated contacts, and the power pins have a continuous current rating of 9 A at up to 125 V AC or DC. When fully engaged, the coupling provides IP66/67 sealing, blocking dust and high-pressure water during washdown procedures. The electrical insulation withstands a 2500 V test pulse, aligning with Overvoltage Category III requirements for machine-level power zones. The assembly can be routed at sites up to 2000 m above sea level and is suitable for environments classified as Pollution Class 3.
