ENDAT-AKM-015M-MCS-DCA-28-NA Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
MPN: M.1302.8608
The ENDAT-AKM-015M-MCS-DCA-28-NA is a servo cable produced by Kollmorgen as part of the Kollmorgen Servo Cables series. This static cable measures 15 meters, uses a twisted pair conductor format, and features a straight motor connector with a 45 degree drive connector angle. It supports single and multi-turn absolute encoders, uses BiSS and EnDat 2.1 feedback protocols, and has a wire gauge of 28 AWG.
Internal Product Review
The ENDAT-AKM-015M-MCS-DCA-28-NA is a Kollmorgen servo cable built for static installations and dependable machine-level feedback routing. Support for BiSS/EnDat 2.1 and single- or multi-turn absolute encoders makes the assembly well suited for accurate motion-control integration. Twisted-pair construction and a 45° drive connector give the cable a clean, practical layout for precision servo systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ENDAT-AKM-015M-MCS-DCA-28-NA servo feedback cable is produced by Kollmorgen and belongs to the Kollmorgen Servo Cables series. It routes encoder signals and auxiliary power between an AKM motor and a Kollmorgen drive, allowing closed-loop positioning in industrial automation. By combining shielded pairs for sensing with dedicated power cores inside one jacket, the product reduces wiring time and supports repeatable installation in control cabinets and moving axes.
The assembly is supplied in a factory-terminated length of 15 m, giving adequate reach from the cabinet to the motor on medium-sized machines without splicing. It is classified for static use, meaning the jacket and strain-relief components are intended for fixed routing rather than continuous-flex tracks. Signal conductors follow a twisted-pair layout that minimizes crosstalk and preserves differential impedance for high-speed serial data. At the drive end, the circular connector is oriented at 45°, allowing the plug to clear adjacent fieldbus or power modules while still fitting within standard enclosure depths. Copper cores for feedback and the auxiliary supply are sized at 28 AWG; this gauge balances voltage drop with a compact outside diameter so the cable can pass through tight gland plates.
The harness supports single-turn and multi-turn absolute encoders, enabling the control system to recover position after a power loss without a homing cycle. Digital communication runs over the bidirectional BiSS/EnDat 2.1 protocol, providing noise-resistant data frames with an embedded cyclic redundancy check for fault detection. For legacy drives that expect analog feedback, the cable also carries sine-cosine tracks from a sine encoder, allowing hybrid operation. On the motor side, a straight connector profile aligns with AKM stator housings, keeping the strain relief in line with the cable and avoiding side loading during installation.
