ENDAT-AKM-001M-MCS-DCA-28-NA Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
MPN: M.1302.8605
The ENDAT-AKM-001M-MCS-DCA-28-NA is a servo cable manufactured by Kollmorgen as part of the Kollmorgen Servo Cables series. It features a 15-pin D-Sub drive connector and a M23 SpeedTec motor connector with 17 pins. The cable supports an EnDat 2.1/BiSS B encoder interface and has a conductor count of 16.
Internal Product Review
The ENDAT-AKM-001M-MCS-DCA-28-NA is a Kollmorgen servo cable featuring an EnDat 2.1/BiSS B encoder interface and a 15-pin D-Sub drive connector. The M23 SpeedTec motor connector and 45° drive exit angle support clean routing and efficient installation in servo assemblies. A 16-conductor design gives the assembly a well-engineered signal package for high-quality motion feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ENDAT-AKM-001M-MCS-DCA-28-NA is a servo feedback and power hybrid cable manufactured by Kollmorgen within the Kollmorgen Servo Cables series. It links AKM motors to compatible drives, carrying encoder signals and phase currents within a single jacket to simplify installation in industrial automation cells. By combining power conductors with differential data pairs, the assembly supports synchronized motion control while reducing the amount of wiring routed between the motor and control panel.
The cable contains 16 conductors arranged to maintain separation and balanced impedance between the power and signal groups. At the drive end, it terminates in a 15-pin D-Sub connector that mates directly with Kollmorgen S300 and S400 servo amplifiers. A molded boot provides a 45° exit angle, reducing strain when the cable must turn inside a compact control enclosure. During moving-machine service, the copper conductors accommodate a 63 mm dynamic bend radius, making the cable suitable for continuous flexing on linear slides or robot wrists. The thermoplastic jacket has a 10.5 mm outer diameter, providing abrasion resistance while keeping the cable compact enough for constrained routing paths. Feedback travels through twisted, shielded pairs that support the EnDat 2.1/BiSS B serial interface, allowing absolute position data to pass over a bidirectional communication line. The shielding helps protect low-level feedback signals from electromagnetic interference generated by the adjacent motor power conductors.
The motor end uses a keyed M23 SpeedTec connector with bayonet locking for rapid quarter-turn engagement. Its signal insert contains 17 contacts, with separate connections for grounds and shields to preserve encoder signal integrity beside the three-phase power leads. For fixed routing inside control cabinets or other stationary machine areas, the cable requires a 42 mm static bend radius. This smaller fixed-routing allowance permits placement behind door panels or beneath machine bases without subjecting the conductors to excessive strain. The keyed connector helps prevent incorrect alignment during installation, while the locking mechanism keeps the connection secure under normal machine vibration.
