ENC-AKM-009M-MCS-DCA-28-NA Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
MPN: M.1302.8542
The Kollmorgen ENC-AKM-009M-MCS-DCA-28-NA is part of the Kollmorgen Servo Cables series and is a 9 meter static-grade cable with a conductor makeup of 8 pairs 28 AWG and 1 pair 16 AWG. It features a motor straight connector, a 45 degree angle D-sub 15-pin HD male drive connector for F1/F2 ports, and transmits incremental encoder feedback signals including A, B, I, and commutation signals.
Internal Product Review
The ENC-AKM-009M-MCS-DCA-28-NA is a Kollmorgen servo cable for static applications, using 8-pair 28 AWG plus 1-pair 16 AWG conductors for balanced power and feedback handling. Twisted-pair construction and incremental encoder commutation feedback support clean signal transmission and consistent motor feedback in motion control systems. The motor straight and drive 45° angle connector style makes F1/F2 port integration especially convenient.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ENC-AKM-009M-MCS-DCA-28-NA feedback cable is supplied by Kollmorgen within the Kollmorgen Servo Cables series. Designed for AKM servo motors, the assembly carries encoder information and auxiliary power between the motor housing and its matching drive. In closed-loop automation, this connection conveys incremental position data so the drive can align stator currents with the rotor angle and maintain commanded torque. The model integrates signal conductors and supply cores in a single jacket, simplifying cabinet wiring and reducing the number of separate cable runs required between connected components.
The cable has a static installation rating, meaning its jacket is intended for fixed installations rather than the continuous flexing found in drag chains. A total length of 9 m allows the cable to span typical distances from floor-mounted drives to motors on indexing tables or gantry axes. Inside the sheath, eight 28 AWG pairs and one 16 AWG pair separate the low-level encoder channels from the heavier supply conductors. The larger pair reduces voltage drop on the sensor power circuits over the full cable length. The cable has a straight motor connector and a 45-degree angled drive connector, permitting strain-relieved routing from compact enclosures while maintaining a low profile at the cabinet wall.
On the drive side, a D-sub 15-pin high-density male connector mates with the controller encoder socket marked F1/F2. Differential encoder tracks A, B, and I, along with Hall sensors S1 through S3, travel on individually shielded pairs with a twisted-pair arrangement that minimizes crosstalk. The signaling method uses an incremental encoder with commutation, supporting differential line receivers inside the amplifier. Power for the sensor electronics is routed through dedicated conductors carrying 9 VDC, +5 VDC, and COM. A separate conductor transmits the temperature sensor signal, allowing the drive to reduce motor current if excessive heat is detected during operation.
