ENC-AKM-001M-MCS-DCA-28-NA Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
MPN: M.1302.8590
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen ENC-AKM-001M-MCS-DCA-28-NA is part of the Kollmorgen Servo Cables series and measures 1 meter in length. This static motor feedback cable features a 45° angled drive connector, straight motor connector, and supports an incremental encoder. It uses twisted pair wire construction with a wire gauge of 28 AWG.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ENC-AKM-001M-MCS-DCA-28-NA feedback harness is manufactured by Kollmorgen for the Kollmorgen Servo Cables series. It is a motor-to-drive interconnect that carries encoder signals from an AKM servo motor to its matching drive in industrial automation equipment. By relaying position information, the cable enables the control loop to synchronize torque output with commanded motion profiles, ensuring accurate axis positioning. This dedicated connection allows the drive to monitor shaft movement and respond to changes during controlled operation.
The assembly is supplied at a fixed length of 1 m, which is suited to installations where the drive and motor remain within a shared cabinet or on adjoining panels. A 45° angled plug at the drive end orients the backshell so that conductors clear heat sinks and ducting without forcing a tight bend. Internally, the signal conductors use a twisted-pair arrangement that balances electromagnetic fields, minimizes crosstalk, and maintains differential impedance for accurate edge detection. Each copper core is sized to 28 AWG. This fine wire gauge supports the milliamp-level currents of encoder channels while allowing a smaller overall bundle diameter that fits through narrow gland plates.
The cable is classified as a motor feedback cable, so its insulation, shielding, and drain arrangement protect low-voltage sensing circuits. Its static application rating indicates that the jacket is intended for stationary routing rather than repeated flex cycles, making it suitable for cabinet paths or machine frames with minimal movement. Support for an incremental encoder means the conductors are pinned for A, B, and reference channels with complementary returns, allowing the drive to determine direction and count pulses. A straight connector on the motor side mates flush with the AKM feedback receptacle, reducing axial stress on the encoder housing. Standardized color coding helps distinguish individual conductors during installation, while consistent drain-wire placement supports proper shield termination. The harness provides a dedicated signal path between the encoder and drive without combining the feedback conductors with motor power wiring.
