CM12A1-025-005-00 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen CM12A1-025-005-00 motor cable is part of the Kollmorgen Servo Cables series and is specified for centralized systems. It features a 2.5 mm² wire cross section, supports a brake option, and has an AKM&C/CH motor connector with a connector size of 1.0. This cable is compatible with AKD-x01206, x02406, x00307 through x02407 drives and allows a maximum motor-end wire size of 4 mm².
Internal Product Review
The CM12A1-025-005-00 is a Kollmorgen motor cable designed for centralized servo systems. The AKM&C/CH motor connector and size 1.0 interface support clean installation and consistent connection quality. Broad compatibility with AKD-x01206, x02406, and x00307...x02407 drives makes the cable a strong choice for dependable motion integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CM12A1-025-005-00 is a factory-terminated motor power lead produced by Kollmorgen for use within its motion-control systems. The assembly links AKM servo motors to compatible AKD drives, carrying phase current and optional brake conductors in a single jacketed run. In centralized control architectures, it provides a pre-engineered connection from cabinet-mounted drives to moving axes, reducing field wiring time and providing conductor geometry that supports electromagnetic compatibility. Its factory-terminated design also eliminates the need to assemble the main connectors during installation, helping maintain consistent conductor placement and shield termination throughout the cable.
Kollmorgen classifies this assembly as a motor cable, and its power cores and protective earth conductor are sized for continuous motor current. Each live conductor has a cross-sectional area of 2.5 mm², balancing current capacity with routing flexibility in cable trays. The molded MS connector on the drive side follows size code 1.0, allowing a direct connection to compatible AKD power terminals without adapters. A separate pair for the holding brake is included because the assembly is supplied with brake conductors, allowing the drive to energize the brake coil through the same harness. Drive compatibility includes AKD-x01206, x02406, and x00307 through x02407. The current ratings of these drives remain within the cable conductor limits, so the cable does not require current derating for the listed models.
At the motor end, the hybrid circular plug marked AKM&C/CH connects to AKM or AKM C motor frames that use the CH shell pattern. Individual brake wires terminate inside this housing and accept crimp ferrules up to 4 mm². The cable supports centralized system layouts, allowing drives to remain in one enclosure while the motors are mounted remotely on the machine frame. As part of the Kollmorgen Servo Cables series, the assembly uses conductor color codes, shield coverage, and an outer diameter consistent with related Kollmorgen interconnect products. This arrangement supports organized routing between the control cabinet and motor while keeping the motor power and brake circuits within one jacketed cable.
