CM01A1-010-003-00 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen CM01A1-010-003-00 servo cable is part of the Kollmorgen Servo Cables series and has an assembly weight of 0.536 kilograms. It is 3 meters long with a 94 millimeter bend radius and features a TPE cable jacket material. The cable has a temperature rating of 105 degrees Celsius and a voltage rating of 600 volts.
Internal Product Review
The CM01A1-010-003-00 is a Kollmorgen servo cable with a TPE jacket and a 600 V rating. The AKM&C/CH Connector 1.0 motor connector supports clean integration, and the 105 C temperature rating adds confidence in higher-heat control environments. Strong construction and application-focused electrical capacity make the cable a very capable choice for servo installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CM01A1-010-003-00 is a power and feedback lead manufactured by Kollmorgen as part of the Kollmorgen Servo Cables series. It connects AKM servo motors to compatible drives in industrial automation systems, transferring motor phase power and sensor signals through a single cable. By providing a preterminated harness, it reduces wiring time and preserves signal integrity between the axis amplifier and the motor housing. The combined cable also reduces the number of separate connections required between these components.
A minimum bend radius of 94 mm allows the jacket to be routed around control cabinet corners without exceeding conductor strain limits. The overall length of 3 m suits short point-to-point runs between drive racks and nearby machine frames. Its insulation system is rated for 600 V, accommodating the operating voltages commonly used with low-inertia servo motors. The outer jacket is molded from TPE, a material that resists cutting oils and maintains flexibility at low temperatures. Each power core has a cross-sectional area of 1.0 mm², balancing current capacity with compact routing requirements. The assembly is supplied without a mechanical brake lead, making it suitable for motors that do not use a holding brake.
An outside diameter of 9.4 mm keeps the bundle size moderate while providing room for shielding and individual conductor insulation. The cable has a maximum temperature rating of 105 °C, supporting continuous operation inside control enclosures that become warm because of drives and power supplies. Its total assembly mass is 0.536 kg, which limits the load placed on strain-relief brackets and connector interfaces. The motor end terminates in a keyed AKM&C/CH Connector 1.0 that mates directly with compatible Kollmorgen motor receptacles. Neither dynamic nor static flex operation is rated for this cable, so it should be secured in a fixed routing path instead of being installed in a continuously moving cable chain. Adequate support near each termination helps prevent cable weight or external movement from placing unnecessary stress on the electrical connections.
