CFE0A1-002-006-00 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen CFE0A1-002-006-00 encoder cable is part of the Kollmorgen Servo Cables series and measures 6 meters in length. It features a shielded construction with 7 twisted pairs, a conductor cross-section of 0.25 mm², and supports the EnDat/BiSS feedback protocol. The cable has Sub-D style 15-pin drive connectors for AKD X10 interface and 17-pin motor connectors for AKM&C/CH Connector 1.0.
Internal Product Review
The CFE0A1-002-006-00 is a Kollmorgen encoder cable for servo feedback applications. Twisted-pair construction and shielded design support stable signal integrity in electrically active control cabinets. The Sub-D drive connection matches the AKD X10 interface, making the assembly an excellent choice for precise feedback links.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CFE0A1-002-006-00 is an encoder feedback lead produced by Kollmorgen for the Kollmorgen Servo Cables series. It links an AKM or AKM² servo motor to an AKD drive, carrying incremental or absolute position data so the control loop can close with minimal latency. The cable integrates into industrial automation assemblies that rely on real-time feedback to maintain precise shaft orientation, speed regulation, and positional accuracy during coordinated motion.
This model is supplied in a length of 6 m, allowing controller cabinets to be placed away from moving axes while preserving signal integrity. Its jacket encloses a bundle arranged as 7 × (2 × 0.25); seven individually shielded pairs each use conductors with a 0.25 mm² cross section, balancing current capacity with flexibility. A core geometry consisting of twisted pairs minimizes loop area and helps cancel differential noise generated by adjacent power conductors. The assembly is shielded, and its foil-and-braid shield connects to ground through the connector housing to guard against radiated electromagnetic interference. Position information is encoded using the EnDat/BiSS serial protocols, permitting high-resolution multi-turn data exchange and automatic identification functions without additional wires.
On the drive end, a Sub-D shell houses 15 pins that mate directly with the AKD X10 feedback header. The opposite end terminates in a circular motor plug with 17 pins for sensor, calibration memory, and temperature connections. The AKD X10 interface carries clock, data, and secondary power in a layout that supports hot-plug detection and continuity monitoring. A factory-installed thermal contact inside the motor connector routes stator temperature information to the drive. This signal allows the drive to adjust current limits in response to heating, helping protect the winding insulation during dynamic duty cycles.
