CCNCN1-025-12M00-00 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The CCNCN1-025-12M00-00 is a servo cable manufactured by Kollmorgen and is part of the Kollmorgen Servo Cables series. This Y Type adapter form cable has a length of 12 meters, uses a braided shield, and features a polyurethane jacket. It supports a current rating of less than 20 A RMS and integrates two DC conductors, one PE conductor, and two signal pairs.
Internal Product Review
The CCNCN1-025-12M00-00 is a Kollmorgen servo cable with a Y-type adapter form and a polyurethane jacket. Braided shielding with termination at the connector housings supports clean signal performance in demanding motion systems. Four-line bus capability and a current rating below 20 A RMS make this cable a well-engineered choice for dependable servo interconnections.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CCNCN1-025-12M00-00 is a servo power and signal cable produced by Kollmorgen for the Kollmorgen Servo Cables series. It forms the dedicated link between AKD-C cabinet drives and AKD-N distributed drive heads, carrying DC bus power, protective earth, and control lines through a single routed harness. By combining power conductors, signal pairs, and shielding within one assembly, the cable simplifies installation and maintains electromagnetic compatibility in automated machinery that uses distributed servo axes. Its integrated layout also reduces the number of separately routed cables required between the cabinet drive and the distributed drive head.
This model is supplied in a factory-terminated length of 12 m, and its copper cores support a continuous phase current of less than 20 A RMS. The energy pair has a cross-sectional area of 2.5 mm², providing the required current capacity while keeping the overall cable diameter moderate. A durable polyurethane jacket protects the conductors against oil, abrasion, and constant flexing. A braided shield surrounds the conductor bundle to suppress common-mode noise that could interfere with feedback electronics. Two DC conductors distribute the shared bus voltage, while one protective earth conductor provides the fault-current path. Two twisted signal pairs provide differential paths for drive-enable and safe torque off functions. The conductor arrangement helps keep voltage drop and crosstalk within the operating limits of compatible Kollmorgen drives during dynamic motion.
The adapter at the drive end uses a Y-type breakout, presenting the power cores to two AKD-C-side connections while routing the network and safety lines separately. Two molded hybrid connectors mate with the AKD-C module, and a single AKD-N plug marked X1 connects to the motor-side drive head. Communication over the integrated four-line bus allows decentralized axes to share DC power without separate power wiring. The conductor pairs assigned to encoder emulation have a cross-sectional area of 0.25 mm², balancing signal fidelity with cable flexibility. The shield braid terminates directly at the connector housings to provide a continuous shielding path across the assembly. The cable supports total run lengths of up to 40 m when the machine layout requires extended routing between connected drive components.
