Product Description:

The TTE-29360-1010-FA-13 is a DC servo motor manufactured by Kollmorgen for the Inland Direct Drive Motors series. The motor integrates the armature, shaft, and mounting features in one housing, allowing it to fasten directly to process machinery without belts or gearboxes. By supplying proportional torque in response to a regulated DC drive, it enables precise positioning and speed control in pick-and-place heads, winding stations, and similar industrial automation applications.

The circular mounting flange measures 4.50 in (114 mm) in diameter, while its face has a thickness of 1.21 in (31 mm). This compact nose section aligns accurately with pilot bores and limits the space required at the mounting surface. Behind the flange, the steel body extends to an overall length of 12.60 in (320 mm), while the housing diameter remains within 4.25 in (108 mm) to provide clearance in tight enclosures. The windings accept up to 115 VDC, so a single-supply industrial power module can drive the armature without step-up conversion. Output torque is transmitted through a keyed shaft with a diameter of 0.75 in (19 mm), matching standard couplings and pulleys.

The shaft projects 1.38 in (35 mm) beyond the flange, providing sufficient engagement length for clamping hubs while maintaining bearing support. Power and feedback leads exit through a sealed terminal box, which simplifies conduit entry and provides strain relief for the wiring. The rated direction of rotation is clockwise, providing a fixed reference when multiple axes use a common direction convention. Four tapped holes use a 4 × 3/8-16 on a 3.75 in (95 mm) bolt-circle pattern to secure the motor against a faceplate. Each mounting hole has a minimum thread depth of 0.75 in (19 mm) to withstand axial clamping loads, while a front span limit of 4.85 in (123 mm) provides a clearance reference for nearby couplings and enclosure surfaces.