DIGIFAS 7116-SPS
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
Kollmorgen's DIGIFAS 7116-SPS from the DIGIFAS 7000 Servo Amplifiers is a controller module with electrical isolation. It features two CAN interfaces, operates on 100-240 VAC input voltage, and consumes 14.5 watts of power. Its network capability is affirmed and it requires screw-in module mounting.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
DIGIFAS 7116-SPS is a Digifas 7100 series servo amplifier. Its manufacturer is Kollmorgen. This amplifier series must be used on a three-phase 400 Volts earthed industrial mains to control a 6SM series synchronous servo motor. It must be installed in a closed switch cabinet. A name plate mounted on the unit lists important information that allows identification. The DIGIFAS 7116-SPS amplifier belongs to the Bit Connect version with a PLC interface, ten I/O leads for control connection, holding brake, support for positional control and setpoint input from automation equipment. The amplifier requires three-phase input at 80 to 400 Volts AC. It can support 7 kVA load for S1 operation. The output current is 16 Amps and the peak output current is 32 Amps for 5 seconds.
The switch-on and switch-off thresholds for the ballast circuits are 720 Volts and 680 Volts respectively. The ballast circuit can handle 10.4 kilowatts pulse power for 1 second. The internal continuous power rating of the ballast circuit is 200 Watts. A ballast resistor with minimum 50 Ohms resistance can be used with the amplifier. Minimum inductance for the connected motor is 2.5 millihenry. Clock frequency of the amplifier output stage is 8.33 kilohertz. The quiescent power loss with a disabled output stage is 15 Watts and the power loss at rated current is 180 Watts. Weight of the amplifier unit is 7.9 kilograms and its approximate dimensions are 340 x 105 x 341 millimeters. Operation with rated values requires 0 to 45 degrees Celsius ambient temperature. The derating is 2.5%/C for 45 to 55 degrees Celsius temperature. Protection class of the amplifier is IP20 and it is mounted in the vertical orientation.
Frequently Asked Questions about DIGIFAS 7116-SPS:
Q: What is the power loss at rated current?
A: The power loss at rated current is 180 Watts.
Q: What is the intermediate circuit voltage?
A: The intermediate circuit voltage is 560 Volts.
Q: What is the weight of the amplifier?
A: Weight of the amplifier is 7.9 kg.
Q: What are the amplifier dimensions?
A: The amplifier dimensions are 340 x 105 x 341 millimeters.
Q: Who should handle and operate the unit?
A: Only trained professionals should operate the unit.
