Product Description

Kollmorgen uses world-leading technologies to manufacture its products like synchronous servo motors, frequency converters, and industrial PCs.

The DBL3N00300-03S-000-L50 model is a synchronous servo motor manufactured by Kollmorgen to be used in conjunction with the respective servo amplifier. The DBL3 synchronous servo motor is designed to make an electrical connection from the 3-phase AC 400 – 480 V power source and it delivers the rated torque of 2.5 Nm. The motor consumes the rated current of 1.82/1.73 A while operating at the input voltage of 400/480 V. The rated speed of the synchronous motor is 3000 – 3600 rpm. The DBL3 synchronous servo motor can be used in various motion control systems and it generates the rated power of 0.82/0.94 kW. The thermal time constant for this model is 32 minutes and it comes with a winding inductance of 11.6 Ohms. High-quality permanent magnets are used in this motor to provide high dynamics under extreme operating conditions. The unit comes with a 75 mm flange design that allows it to be installed in any permissible mounting condition and it is prohibited to be used in potentially explosive areas. The DBL3 motor is not equipped with a holding brake to hold to the output shaft at standstill.

The model DBL3N00300-03S-000-L50 comes with a singleturn encoder to detect the exact position of the motor shaft. The encoder also controls the position and the current of the synchronous servo motor. The electrical connector of the motor faced B-side and a smooth output shaft is installed in this unit or continuous power output. The power and feedback connectors of the motor are protected against high voltage and high-temperature effects. The housing of the DBL3 servo motor is protected under the IP65 protection standard along with the shaft seal. The model DBL3N00300-03S-000-L50 can be ordered from Wake Industrial along with a product replacement warranty.