DBL3M00300-BR2-000-S40
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The DBL3M00300-BR2-000-S40 servomotor delivers a rated power of 3.36 kW and a rated speed of 3000 min⁻¹ at 400V operation. Manufactured by Kollmorgen, it is part of the DBL Synchronous Servomotors series and weighs 11.2 kg. It features mains voltage of 230-480 VAC and a thermal time constant of 55 minutes.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
This DBL3M00300-BR2-000-S40 synchronous servomotor depends on a resolver for feedback. The product must comprise proper EMC shielding. The device’s commissioning is supposed to be done only by specialist personnel with knowledge of drive technology. This unit has to be checked to ensure that its housing temperature is lower than 40 °C before touching it. It is supplied with a sinusoidal current from the motor after evaluating the position of the resolver. The motor’s operating altitude should not exceed 5000 m.
This product uses a locking thread for power transmission through the cylindrical shaft end. The device cannot function without a servo amplifier. This unit is designed like precision equipment. Its coupling must be tightened using the locking thread. The motor’s resolver has a hollow shaft and two poles. Its pole setting is done in the connected servo amplifier. This product’s shielding should be done through EMC-cable glands over a wide surface area. The device uses preassembled cables from the manufacturer. This unit might cause burns if it is touched when the surface temperature is higher than 40 °C. Its servo amplifier may perform an unplanned movement during the commissioning.
The motor has a faulty output stage when it has an earth short. This product’s voltage constant helps in determining its induced EMF as a sinusoidal value. The device delivers its rated torque indefinitely in the continuous operation mode at the rated speed. This unit can withstand an axial load of not more than 85 N. Its resolver does not result in an increased length. The synchronous servomotor pickup action should not be done using the shaft.
Frequently Asked Questions about DBL3M00300-BR2-000-S40:
Q: How should the power and encoder cables of the DBL3M00300-BR2-000-S40 motor be routed?
A: The power and encoder cables of the DBL3M00300-BR2-000-S40 motor should be routed away from each other by more than 20 cm.
Q: Where is the pole count of the DBL3M00300-BR2-000-S40 motor and resolver set?
A: The pole count of the DBL3M00300-BR2-000-S40 motor and resolver is set in the servo amplifier.
Q: Why does the DBL3M00300-BR2-000-S40 motor tend to oscillate?
A: The DBL3M00300-BR2-000-S40 motor tends to oscillate because the shield of the resolver cable is broken.
Q: At what speed can the standstill torque of the DBL3M00300-BR2-000-S40 motor be maintained indefinitely?
A: The standstill torque of the DBL3M00300-BR2-000-S40 motor can be maintained indefinitely at zero speed.
Q: What is the surface temperature of the DBL3M00300-BR2-000-S40 motor during use?
A: The surface temperature of the DBL3M00300-BR2-000-S40 motor during use can be as high as 100 °C.
