DBL3M00190-0R2-00K-S40
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The DBL3M00190-0R2-00K-S40 motor is manufactured by Kollmorgen. As part of the DBL Synchronous Servomotors series, it offers a rated power of 0.5 kW @ 400V and a torque constant of 1.34 Nm/A. The motor provides a standstill torque of 1.9 Nm. Its radial load capacity at 3000 rpm is 350 N.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DBL3M00190-0R2-00K-S40 synchronous servomotor that is offered by Kollmorgen is used in drive systems with a digital servo amplifier matching its voltage and current ratings. This motor operation is not supported in potentially explosive and corrosive environments. The product depicts a keyway output shaft. This device is to be commissioned only after ensuring that the installation machine adheres to the low voltage directive. The unit’s holding brake offers no support for a retrofitting action. Its rare earth magnets help in driving the motor in a highly dynamic fashion.
This motor encounters a 6% power derating up to 2000 m above sea level. The product lacks brushes and depends on the servo amplifier for its commutation. This device doesn’t have protection against overload or short circuit with its thermostat. The unit uses the servo amplifier to control the holding brake. Its length is increased by around 10 mm because of the holding brake. This motor must feature adequate ventilation at the site of installation. The product’s bearings have a short life when the radial and axial loads are above the permissible limits. This device’s DC link voltage must be below 50 V when it is touched after operation. The unit may have live power and control leads for a short period after use when its rotation is not happening. Its cables must have an adequate cross-section when they carry a heavy current.
This synchronous servomotor’s wiring must be checked as one of the steps in its setup process. The product might not show signs of rotating when its holding brake is not released. This device’s peak current is determined by the associated servo amplifier. The unit’s brake portrays a voltage rating of 24 VDC. Its rated speed at 400 V is 3000 min-1.
Frequently Asked Questions about DBL3M00190-0R2-00K-S40:
Q: What is the torque constant of the DBL3M00190-0R2-00K-S40 motor?
A: The torque constant of the DBL3M00190-0R2-00K-S40 motor is 1.34 Nm/A.
Q: What is the peak current of the DBL3M00190-0R2-00K-S40 motor?
A: The peak current of the DBL3M00190-0R2-00K-S40 motor is 6.1 A.
Q: What is the torque constant of the DBL3M00190-0R2-00K-S40 motor?
A: The torque constant of the DBL3M00190-0R2-00K-S40 motor is 1.34 Nm/A.
Q: Why should the key be removed from the shaft of the DBL3M00190-0R2-00K-S40 motor before it is run independently?
A: The key be removed from the shaft of the DBL3M00190-0R2-00K-S40 motor before it is run independently to avoid its expulsion due to centrifugal forces.
Q: How long do the capacitors of the DBL3M00190-0R2-00K-S40 motor have a dangerous voltage after the mains supply is switched off?
A: The capacitors of the DBL3M00190-0R2-00K-S40 motor have a dangerous voltage for up to 10 minutes after the mains supply is switched off.
