CTP12ELS13MAA00 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen CTP12ELS13MAA00 is a stepper motor from the CT Stepper Motors series with a frame size of 17 and a step angle of 1.8 degrees. It features holding torque of 0.44 N-m, a rated current of 1.3 A DC, and an insulation voltage rating of 80 VDC. The motor has a net weight of 0.34 kg and provides an axial shaft load capacity of 6 lbs push or 15 lbs pull.
Internal Product Review
The CTP12ELS13MAA00 is a Kollmorgen CT Stepper Motor with 0.44 N-m holding torque and a 1.8° step angle. Six-lead connections and 1.3 A DC rated current support straightforward drive matching and stable motion control performance. A strong choice for compact positioning applications where consistent torque and clean stepping are priorities.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CTP12ELS13MAA00 is a hybrid stepper motor manufactured by Kollmorgen for the CT Stepper Motors series and is part of the Cool Torque Performance Series. It delivers open-loop incremental motion for indexing tables, label applicators, and other compact automation axes that require repeatable positioning without encoder feedback. The design supports high torque density in a small housing and provides a direct-drive solution that reduces mechanical complexity and maintenance.
The motor uses a Size 17 / 4.2 cm frame with English-threaded mounting holes and a 22.0 mm pilot for registration. Electrical power is supplied through six color-coded leads, allowing series or parallel wiring, with a continuous phase current of 1.3 A DC. The copper windings have a resistance of 4.13 Ohms and an inductance of 3.9 mH, which influence current rise time and suitable microstepping rates. At 5.3 VDC, the winding insulation is rated for 80 VDC and maintains 100 MΩ to ground. In bipolar drive mode, the motor produces 0.56 N·m of dynamic torque, and each command pulse advances the rotor by 1.8°, giving 200 full steps per revolution. The metric shaft has a straight-cut end that simplifies coupling to timing pulleys or pinions.
For static positioning, the motor provides a holding torque of 0.44 N·m. The detent torque is 0.021 N·m, and the motor can accept axial loads of 6 lb push or 15 lb pull, with a radial load capacity of 15 lbs (6.8 kg) at the shaft center. Total mass is limited to 0.34 kg, while the laminated rotor has an inertia of 0.075 × 10⁻³ kg·m² to support quick acceleration in the two-stack design. Thermal performance is managed through a junction-to-ambient resistance of 4.71 °C/W, allowing rated operation when adequate airflow is available. The motor has a 5.0 mm metric shaft diameter, no rear add-ons, and a High Torque Performance Series design.
