AKMH52H-ACKNCA1K
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The AKMH52H-ACKNCA1K servomotor features a frame size of 52 mm, a continuous stall torque of 3.41 Nm, a rated voltage of 230V, and an enclosure rating of IP69K for extreme protection. From the AKMH Stainless Servomotors by Kollmorgen, it offers multiturn absolute feedback with EnDat 2.2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Delivered by Kollmorgen, the AKMH52H-ACKNCA1K synchronous servomotor needs no conduit for its cable. This motor supports a 1 m length for its cable. The product depicts a 2 rotor length. This device features flange mounting according to IEC standards. The unit’s shaft seal should be subject to a run-in procedure given in its manual for the motor to ensure rated performance. Its rotor length determines the overall length of the motor. This motor makes use of a fixed cable because of the protection class requirements for hygienic applications.
The product’s hybrid cable is connected inside the motor and combines feedback and power signals. This device supports an IP69K protection rating according to DIN 40 050-9 specification for high temperature and high pressure cleaning. The unit’s temperature sensor has a 155 °C +/-5% rated temperature. Its temperature sensor offers no protection against shorts. This motor features FDA approval for all its external materials. The product is ideal for medical laboratories and pharmaceutical industries. This device’s external surface is resistant to P3-topactive DES cleaning agents. The unit’s cleaning can be done by flushing water with low pressure between a temperature of 40 °C to 50 °C in the direction of the drain. Its components must not get damaged during its handling and transportation.
This synchronous servomotor’s shaft has to be always free of axial forces whenever possible. The product’s permitted force limits mustn’t be higher than the indicated limits. This device tends to be subject to galvanic corrosion if the direct coupling elements are made of more active materials. The unit can’t be mounted upright with its shaft pointing to the top. Its O-ring must be placed on the groove of the flange.
Frequently Asked Questions about AKMH52H-ACKNCA1K:
Q: What factors determine the rotor length of the AKMH52H-ACKNCA1K motor?
A: The rotor length of the AKMH52H-ACKNCA1K motor is determined by the magnet size and the number of permanent magnet rows.
Q: What is the insulation class of the AKMH52H-ACKNCA1K motor?
A: The AKMH52H-ACKNCA1K motor has Class F insulation according to IEC 60085 specifications.
Q: How is the power transmission of the AKMH52H-ACKNCA1K motor made through the cylindrical shaft end?
A: The power transmission of the AKMH52H-ACKNCA1K motor is made through the cylindrical shaft end with a locking thread.
Q: When does the axial force of the AKMH52H-ACKNCA1K motor increase?
A: The axial force of the AKMH52H-ACKNCA1K motor increases when angular gearheads are used.
Q: What is the roughness of the surface of the AKMH52H-ACKNCA1K motor?
A: The roughness of the surface of the AKMH52H-ACKNCA1K motor is less than 0.8 µm.
