Product Description

The AKMH31E-CNKNCA5K Kollmorgen synchronous servomotor is used with the manufacturer's servo amplifier in a drive system. This product installation and commissioning must be done only after reading the associated documentation. The device assembly, setup, maintenance and transport should be done by only qualified personnel. This unit tends to get damaged due to overheating. It is not meant to be coupled directly to active metals that can cause galvanic corrosion. The motor may cause minor burns if it is touched when it is in use. This product depicts face mounting in accordance with IEC standards. The device uses a cable of 5 meters in length for its connection. This unit uses silicone tubing for the protection of its electrical interfaces and cable. It is used for applications where high requirements for dynamics and hygiene are required. The servomotor can be used in food splash zones. This product is meant to be installed as a component of electrical machines. The device is not to be commissioned if the machine in which it is used does not comply with the EMC Machinery Drive requirements. This motor pickup action must not be carried out by holding on to its cable. The unit should be checked for shaft grooving once a year. Its validity gets invalidated if it is opened. This product related nameplate features details such as standstill torque, standstill current, mains voltage, rated speed and more. The device has a flange diameter of 0.89 mm. This unit has an IP69K degree of protection. Its shaft seal must undergo a run-in procedure as outlined by the manufacturer to ensure the rated performance of the motor for best results.