Product Description

The AKM42G-ANC2R-00 synchronous servomotor from Kollmorgen must be associated with only a matching SERVOSTAR servo amplifier. This product is a brushless DC three-phase motor. This device and the servo amplifier must have proper earthing before commencing the operation. This unit must be checked for its compliance with the permissible axial and radial forces at the time of its electrical installation. Its cables carrying a heavy current must have adequate cross-section as per EN 60204 specifications. The motor incorporates polyesteraphtalate material for its core insulation. This product uses UL-Listed cables with the UL style number mentioned on the sheathing for its connection. The device features G type winding. This unit has slightly larger than the standard size because of the holding brake. Its holding brake is driven by the connected SERVOSTAR servo amplifier. The motor must incorporate shielding with a connection at both ends for its brake control leads if its power cable features these leads. This product is designed to be used between 5 °C and 40 °C. The device experiences a power derating when the ambient operating temperature and installation altitude are above the permissible maximum limits. This servomotor features no customization. The unit receives its power transmission through its cylindrical shaft end on the A side. Its flange has a tolerance class of N. This product features 480 VAC mains voltage rating. The device encompasses permanent magnets in its rotor. This unit can be commissioned and operated very easily. It ensures a smooth performance because of the low harmonic distortion. This motor comes with a smooth shaft. The product is known for its high performance and durability. This device associated holding brake cannot be retrofitted.