Product Description

The AKM23D-ANB2R-00 DC synchronous servomotor from Kollmorgen is driven by a servo amplifier of the SERVOSTAR series from the same manufacturer. This product is intended to be used only for industrial applications. The device is associated with a rotor length of 2. This unit has a maximum BUS voltage rating of 640 VDC. Its commutation is performed electronically by the connected servo amplifier. The motor is specifically suited for positioning tasks.This product has a brushless design. The device features three phases. This unit must be properly matched with an appropriate servo amplifier to avoid the possibility of it getting damaged. Its bearings are prone to damage if they are subject to blows or use of force. The motor installation is possible horizontally as well as vertically. This product wiring must be undertaken only by qualified and trained personnel in electrical engineering. The device is never meant to be used without establishing a proper grounding connection. This motor has a rated speed of 1500min-1 at 115 V. This servomotor must be associated with a motor choke near the servo amplifier if the motor cable length exceeds 25 m. The unit is prone to radial and axial forces when it is in use. It must be ensured that the permissible limits for both the forces are never exceeded. This product must be connected using only the manufacturer's preassembled cables. The device setup should be carried out only after taking care to ensure that its live connection points are secured against accidental contact. This unit may fail to rotate if its holding brake is not released. Its moment of inertia is a measure of its acceleration capability.