Product Description

The AKM22E-ANB2R-00 synchronous servomotor uses a resolver for feedback. This product is meant to be used at a temperature ranging from 5 °C to 40 °C. The device commissioning can be undertaken only by qualified personnel. This unit can trigger unfavorable consequences due to improper or incorrect wiring. It depicts an error message related to its temperature when the resolver connector is broken. The motor torque constant indicates the torque produced by the servomotor with 1 Arms current. This product portrays a rated power of 0.09 kW at 75 VDC. The device has a surface temperature of more than 100 °C when it is in the operating stage. This unit encompasses a flange that is designed according to IEC standards. It is equipped with a smooth shaft. The motor is largely used in machine tools. This product should never have a direct connection to the mains supply. The device must be free of shock especially at the shaft end when it is being transported. This unit houses ball bearings with grease around them. The servomotor should be checked for noise each year after every 2,500 operating hours. Its matt black finish is not resistant to solvents. The product does not support a retrofit action for the holding brake. This device associated resolver position is evaluated by the related servo amplifier. The unit has an electrically isolated thermistor that signals the temperature of the winding. Its stator is integrated with a three-phase winding that is driven by the stator. This motor must be free of condensation on its surface all the time. The product has an increased radial force if there is a power-off from the center of the free end of the shaft.