Product Description

The AKM11B-ANSNS-02 synchronous servomotor is an AKM series motor from Kollmorgen that works with a SERVOSTAR digital servo amplifier. The servomotor is fitted with an electrically isolated PTC. The unit is equipped with a flange type 1 according to IEC specifications. The device supports B type winding. It features a maximum standstill torque of 0.18Nm. The thermostat does not offer protection against heavy overloading and shorts. The device has a switching point of 155°C +/-5%. It has a power rating of 0.08kW at 115V. The servomotor is available with a one-year warranty period.

The motor has a peak current rating of 4.65A. The device has a rotor length of 1 and B type of winding. It features a smooth shaft and straight connectors at the cable ends. The three-phase device comes with a nameplate that provides details of the temperature, rated power, protection details and so on. The unit must not be stressed when it is fixed in place during assembly. The motor chokes must be installed as close as possible to the servo amplifier. The motor leads have a capacity of less than 150pF/m. The device should be checked for bearing noise after every 2,500 hours of operation.

The servomotor is insulated with polyurethane sheathing that has a 11Y identification code. The motor leads have a lifetime of one million bending cycles and operate in a temperature range of -30°C and +80°C. The device comes with a special connector and a special feedback. The unit does not incorporate a holding brake and features special customization. The motor must be installed at an altitude of 1,000 meters above sea level. It has a 2K3 climate category according to EN 50178 specifications and a temperature range of +25 °C to +70 °C must be maintained during transportation. We can ship the servomotor anywhere in the world through our delivery agents.