Product Description

The AKD-T01207-NBAN-0000 Kollmorgen Ethernet-based servo drive has no extension option. This product is referred to as an AKD BASIC drive. This device comes with encoder emulation onboard. This device comprises an SIL 2 certified Safe Torque Off function according to IEC 60261 specifications. The unit supports bypassing the STO function by establishing a direct connection of the Enable input to the +24 V supply. It has an internal regen resistor with 33 Ohms rating and can support the fitting of an external regen resistor with the same resistance. This drive depicts a position loop bandwidth with 1 Hz to 250 Hz frequency. The product has a single-axis configuration. This device has a total of 11 digital inputs and two analog inputs. The unit features a DC bus capacitance of 470 µF. It cannot be operated with single-phase phase supply networks. This servo device is customized to meet the requirements of USA standards. The product is cULus Listed and CE Certified. This device and its components may get damaged because of wrong motor wiring or the choice of an unsuitable motor. The unit must have a safe earthing connection to the protective earth busbar present in the switch cabinet. It can cause electric shock if it is touched during operation because of the high electric voltage produced. This servo drive may have uncovered live parts when it is in use. The product portrays a rated DC bus link voltage of 340 V to 680 V. This device depicts a voltage rise speed of 7.2 kV/µs. The unit features a tightening torque of 0.2 lbs to 0.25 lbs for its X1 connector. It is connected to the related motor using its feedback connector.