Product Description:

The AKD-P02407-NCEI-0000 is a digital servo drive produced by Kollmorgen within the AKD Servo Drives series. It regulates torque, velocity, and position of matched servomotors so they can track motion profiles generated by a programmable controller. By converting three-phase AC power into controlled pulse-width-modulated output, the unit serves as the core of closed-loop axis control in packaging machines, pick-and-place gantries, and similar automation cells. Because control loops are closed at the drive level, the motor can respond quickly to command changes and load disturbances.

This drive uses the Position Indexer option, which allows step-indexed motion sequences to run directly in the drive. Real-time communication with the PLC is handled over Ethernet/IP, enabling coordinated multi-axis moves and high-speed diagnostic feedback. During continuous duty, the power stage delivers a nominal current of 24 Arms, while transient load events can be supported for five seconds at up to 48 Arms. The input section accepts utility feeds of 240 / 480 VAC three-phase, allowing the same hardware to be used on either 240 V or 480 V plant mains. These electrical ratings make the drive suitable for mid-power linear and rotary servomotors used in material handling zones and process lines. Using indexed moves inside the drive can reduce the need for constant command streaming during repeated motion sequences.

The energy drawn from the supply can reach 15.2 kVA under rated operating conditions, so upstream circuit protection must be sized accordingly. This unit uses the Standard USA customization variant, and its connector styles and parameter defaults match common North American control panels. With a mass of 5.3 kg, the housing can be panel-mounted without additional structural reinforcement. This helps reduce cabinet footprint in modular machines where several drive axes are installed within limited enclosure space.