Product Description:

The AKD-P02407-NCEC-0000 is a servo drive produced by Kollmorgen and belongs to the AKD Servo Drives series. In an automation cell, the unit receives motion commands from a controller and modulates three-phase motor power so that velocity, torque, and position follow the programmed profile. By integrating power electronics, control logic, and network communication into one chassis, the drive simplifies cabinet wiring and supports precise closed-loop regulation of brushless servomotors used on gantries, packaging axes, and material-handling stations.

The drive accepts a line supply of 240 / 480 Vac 3~, enabling direct connection to common factory mains without an autotransformer. At rated conditions, it delivers a continuous phase current of 24 Arms, which is the sustained motor current available without exceeding thermal limits. For short acceleration bursts, the output can reach 48 Arms for five seconds, allowing the motor to overcome inertia or sudden load changes without oversizing the entire power stage. The power section is sized for a continuous apparent power of 15.2 kVA, indicating the maximum volt-ampere load the upstream feeder and protection devices must handle. Command data and diagnostic traffic move over EtherCAT, so deterministic cycle times are achieved while minimizing network cabling.

The drive is configured as a Position Indexer, so it can store target positions and execute them in sequence without an external motion controller. The drive uses the Standard USA version, which matches North American agency requirements and connector conventions. A mass of 5.3 kg keeps panel loading low and permits mounting on DIN rails or subplates without additional supports. The unit is part of the AKD Servo Drive product family and uses the same general operating platform found across related AKD models.