Product Description:

The AKD-P02406-NAAN-0000 is a servo amplifier manufactured by Kollmorgen for the AKD Servo Drives series. Acting as the power stage between controller and motor, it regulates current, voltage, and position feedback so that automated axes follow commanded motion profiles with repeatable precision. It is used in packaging, robotics, and material-handling equipment where closed-loop control is needed to keep dynamic loads on target while protecting the motor from overcurrent and supply disturbances. This role lets the drive support accurate acceleration, deceleration, and steady-state motion across a wide range of automated machinery.

The drive is shipped in the Position Indexer variant, so internal motion commands can be stored and executed without a separate PLC for basic axis tasks. Command and diagnostic signals are exchanged through an Analog interface that accepts ±10 V velocity or torque references. Power arrives on a single-phase or three-phase supply of 120 / 240 Vac 1~/3~, which the converter rectifies and filters before feeding the motor windings. Under continuous duty, the power stage delivers 24 Arms of output, and it can sustain 48 Arms for five-second bursts to overcome acceleration peaks. The input bridge is sized for a continuous apparent power of 7.6 kVA, which suits medium-frame servomotors used on conveyors, gantries, and pick-and-place heads.

The unit supplied as the Standard USA customization is arranged for regional safety and EMC requirements, making it suitable for common North American control-panel installations. Because the hardware extension slot is listed as None (rev 7), the encoder connectors, cooling passages, and I/O terminals remain in their base form without an added option module. The housing weighs 3.7 kg, which supports backplane mounting beside other drives while keeping panel loading relatively low. Its modest mass also helps when several axes are installed side by side in a shared cabinet.