Product Description:

The AKD-P00306-NCEC-0000 servo drive is produced by Kollmorgen and belongs to the AKD Servo Drives series. As a stand-alone motion controller, it regulates current, velocity, and position of brushless servomotors in automated machinery and material-handling cells. By converting fixed-frequency AC mains into a variable, pulse-width-modulated output, the unit supplies precise torque commands to matched motors while exchanging status data with higher-level PLCs. Its compact package allows installation in multi-axis control panels where footprint and thermal density must be balanced against performance demands.

This model is delivered in the Standard USA configuration, so labeling, fusing guidelines, and parameter defaults align with North American codes. During continuous duty, the drive supplies up to 3 Arms of phase current, enough for small-frame motors used in pick-and-place heads and light conveyors. For short acceleration bursts, it can deliver 9 Arms for five seconds, providing extra torque without exceeding thermal limits. The input side is rated at 1.2 kVA, a figure that helps size feeders and protective devices. Power is accepted from single-phase or three-phase mains at 120 / 240 Vac 1~/3~, allowing the same part to operate with the correct supply arrangement.

Control functions are based on the Position Indexer firmware, letting the drive execute point-to-point moves from onboard motion tables without constant PLC intervention. Network integration occurs through the real-time EtherCAT interface, which supports distributed clocks for precise multi-axis synchronization. Despite its capabilities, the enclosure weighs only 1.1 kg, minimizing cabinet rail loading and keeping handling simple during installation. This unit is classified as an AKD Servo Drive.