AKD-P00306-NBCC-E074

Product Description

The AKD-P00306-NBCC-E074 Ethernet servo drive by Kollmorgen portrays customization in accordance with EU English standards. This drive comprises Ether CAT and CANopen field bus connectors. The product can be associated with the desired fieldbus connector by using the DRV.TYPE software parameter. This device incorporates encoder emulation. The unit also has support for secondary feedback. The unit can command multiple motions and process inputs and outputs. Its power section must be provided a fusing by the user. This drive is equipped with a temperature monitoring mechanism for safety purposes. The product has one Enable digital input that cannot be modified by the user. This device is characterized by a maximum installation altitude of 2000 meters over sea level with restricted performance. The unit has a smaller width in the front when compared to the back. It displays the F101 fault code on the LED display when it is associated with incompatible firmware. This product troubleshooting should be done only by personnel trained in operating the servo drive. The device related controller must be checked for log messages when an alarm or error occurs. This unit may run roughly if the filter values set are too low. The drive often issues a warning code before displaying a fault code with the same number. This product may encounter multiple faults when a fault condition occurs. The device can be associated with the EtherCAT connectivity option by setting the S1 and S2 rotary switches to 8 and 9 respectively. This unit shows the En code on its display when the DRV.TYPE parameter is being changed to EtherCAT. Its inbuilt protective measures should not be removed during the setup process. The servo drive related heatsink should be cooled down to a temperature of 40 °C before touching it.