AKD-P00306-NAPN-0000

Product Description

The AKD-P00306-NAPN-0000 Ethernet servo drive is manufactured by Kollmorgen. It is intended to be operated for industrial applications. The drive does not come with an inbuilt fan to support ventilation during the operation phase. The unit depicts a continuous current derating when it is utilized at a temperature between 40 ?C and 55 ?C. The servo drive portrays open and closed time intervals of 10 ms for its relay outputs. Its PE block supports a tightening torque of up to 1.7 Nm. The drive needs finger-safe fuse holders designed as per IEC 60529 specifications to be fitted for standard fuse blocks. The AKD servo drive does not have an internal regen resistor, but it can be connected to an external resistor according to the application related requirements. The drive can be coupled with several other drives by means of a DC bus link connection. It is associated with special timings for switching the output stage on and off when its holding brake function is activated. This product may restart automatically when the power is turned on or there is a dip in the supply voltage based on the parameter setting. The AKD servo drive should never be fitted with painted or non-conductive mounting plates. This unit is highlighted by a standard width for its housing. The unit should be assembled next to the power supply inside the control cabinet. It is important to make sure that there is no condensation water on the drive at any time when a cooling system is installed. The drive may have dangerous voltages in its capacitors for a brief period after the power supply has been disconnected.