Product Description:

The AKD-P00306-NAEC-D000 is a digital servo drive produced by Kollmorgen and assigned to the AKD Servo Drives series. It serves as the power and control interface between a servo motor and higher-level motion controllers, converting mains power into regulated three-phase output while closing position and velocity loops. The drive is intended for automated machinery such as packaging lines, pick-and-place gantries, and indexing tables where accurate torque command execution and quick cycle times are required. It can regulate motor current locally while receiving motion commands and status updates from the machine control layer.

The drive is delivered in the Position Indexer version, so internal logic can execute point-to-point moves without an external PLC. Communication to the host network is handled through EtherCAT, which provides distributed clock synchronization and cyclic data exchange in less than one millisecond. The Standard EU German configuration sets the labeling language and default parameters for European installations. Continuous output is rated at 3 Arms, supporting typical 750 W-class servo motors, while short bursts up to 9 Arms for five seconds accommodate acceleration demands or disturbance rejection during load shocks.

The drive has rev 7 hardware with no optional I/O or safety boards, so it follows the standard build for this version. Input energy requirements remain moderate; the drive draws a nominal 1.2 kVA and accepts a 120 / 240 Vac 1~/3~ single-phase or three-phase mains feed, simplifying cabinet power distribution in mixed-voltage plants. With a chassis mass of only 1.1 kg, the standard-width housing can be DIN-rail or panel mounted without adding significant load to lightweight enclosures. Its compact enclosure is useful in motion systems that need integrated fieldbus communication and onboard indexing in a limited cabinet footprint.