Product Description:

The AKD-M02406-MCEC-0000 servo drive is part of the AKD Servo Drives series manufactured by Kollmorgen for machine-level motion systems. This unit converts incoming AC power into controlled three-phase output that governs torque, speed, and position of connected servomotors in packaging, printing, and material-handling equipment. Supplied in the Standard USA customization variant, it follows electrical conventions common to North American control cabinets and integrates easily with companion Kollmorgen motors and cables. Its role is to translate command signals from the control system into stable motor current so connected axes can start, stop, and hold position with repeatable response.

Its drive uses Motion Control, which supports internal position control and electronic gearing without shifting those calculations to a separate controller. Real-time communication is handled through EtherCAT, so cyclic command and feedback data can be exchanged with low latency across synchronized machine axes. The controller includes a Motion Card 0.8 GHz extension that handles interpolation tasks while the primary processing resources remain focused on current regulation. Power enters through terminals rated for 120 / 240 Vac 1~/3~, allowing the same unit to operate from either single-phase or three-phase service. With a continuous output of 24 Arms, the drive can sustain rated motor torque during normal operation, and its power section is sized for 7.6 kVA so upstream distribution equipment can be selected appropriately.

For short acceleration intervals or temporary load peaks, the output can rise to 48 Arms for up to five seconds before returning to its continuous value. The unit is housed in a package that weighs 3.7 kg, which helps limit panel loading and supports compact multi-axis layouts. As an AKD Servo Drive, it shares the control structure used across the platform, making mixed-power axis groups easier to organize within one machine. This consistency helps maintain similar network behavior and motion functions when several drives are installed side by side.