AKD-M00607-M1EC-0000

Product Description

Kollmorgen products are recognized worldwide for their reliable operation. The AKD-M00607-M1EC-0000 servo drive must be protected against automatic start during repair or replacement. This product has a protective grille on its inbuilt fan. The device features integral solid state short circuit protection. This unit encompasses capacitors that tend to have dangerous voltages for a brief period after it is switched off. It must be made sure that the maximum temperature in the surroundings is 40 °C during operation. The drive is meant to be used in its predefined configuration. This product is likely to cause high-frequency interference when it is put to use in non-industrial areas. The drive must be installed in the associated machinery only after ensuring that its unforeseen movements do not cause personnel injury or property damage. This device acts like an EtherCAT master drive and its X6 connector can be used for up to eight slave drives and offers a string topology with a cycle time of 250 ms. The unit has a very high temperature for its heat sink when it is being operated. It has a motion card with 1.2 GHz frequency. This drive is set up using the KAS IDE software. The product related parameters can be assigned by trained personnel. Its connected feedback device stores the motor nameplate data which is read by the drive automatically at startup. This servo drive related KAS IDE software is compatible with Windows, Unix and Linux operating systems. The device comes with a DVD that contains the installation program for the setup software. This unit displays fault codes on the LED display prefixed by the letter F or E. Its warning codes are prefixed by the letter n. The drive related PDIMM messages are highlighted on the single-character LED display.