Product Description:

The AKD-B02406-NBAN-0000 is an AC servo drive manufactured by Kollmorgen and included in the AKD Servo Drives series. It operates between the incoming power source and a compatible servo motor, using closed-loop current, speed, and position control to support repeatable motion in packaging lines, robotics cells, and material-handling equipment. By integrating these control loops in one unit, the drive supports precise positioning, regulated speed, and controlled torque without requiring a separate analog amplifier for each axis. This makes it suitable for machines that need stable axis behavior during indexing, synchronized transfer, and repeated start-stop cycles.

The drive uses the Standard USA customization, so its default settings and markings align with North American use. It is supplied in the Base version, which means the unit relies on its built-in feature set without optional expansion boards. Command signals are handled through an analog interface, allowing ±10 V speed or torque references from legacy PLCs. Under continuous S1 duty, the power stage can supply up to 24 Arms of motor current, and it can reach 48 Arms for five seconds during short overload events such as acceleration or brief shock loads. This arrangement fits machines that still use voltage-based command architecture instead of networked motion control.

In routine operation, the converter draws a maximum apparent power of 7.6 kVA, so upstream protection and supply conductors must be sized for that demand. It accepts a mains supply of 120 / 240 Vac 1~/3~, which allows use on either single-phase or three-phase feeders depending on the installation. The hardware extension is None (rev 8+), so no auxiliary cards are installed in the unit. The wide input range supports the same drive model across different plant power systems without changing the basic control approach. With a chassis mass of 3.7 kg, the drive remains compact for panel mounting while still requiring the airflow clearances needed for convection cooling.