Product Description

The AKD-B00306-NBSQ-0000 Ethernet servo drive launched by Kollmorgen is meant to be operated only in industrial environments. This servo drive is one of the several such drives in the AKD series. The product can be installed only in a plant or machine that adheres to the regional directives related requirements. This device is supposed to be touched by the user only after electrostatically discharging himself/herself. The unit should be free of shocks during the transportation period. It has one two-character seven-segment LED display to highlight its status after its 24 V supply has been turned on. This drive comes with a grounding plate and the required mating connectors. The product is intended to be connected only with cables supplied by the manufacturer. This device control is achieved through analog velocity commands. The unit is equipped with a TCP/IP service channel. Its integrated safety mechanism aids in overvoltage detection and soft-start of the drive. This servo drive comprises one programmable analog input and one analog output. The product has no option card for extension. This device has no built-in fan for ventilation. The unit is lightweight and weighs only 2.7 kg. It signals the F234 fault code on its display and shuts down automatically when the temperature inside its control cabinet is very high. This drive can be installed at a maximum altitude of 2,500 m over mean sea level with a power derating of 1.5% for every 100 meters. The product portrays a full monotonic 16-bit resolution for its analog inputs and outputs. This device features scalable bandwidths for its position and velocity controllers. The unit must be connected with the regen resistor using a cable of length less than 0.200 m and with 16 AWG cross-section.