AKD-B00306-NAAN-I000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen AKD-B00306-NAAN-I000 servo drive is part of the AKD Servo Drives series and has a nominal current of 3 Arms and a peak output current of 9 Arms. The drive features analog fieldbus connectivity and a rated input power of 1.2 KVA. It supports supply voltages of 120 or 240 Vac in single or three phase and weighs 1.1 kilograms.
Internal Product Review
The AKD-B00306-NAAN-I000 is a Kollmorgen AKD servo drive with analog fieldbus connectivity and a base drive version. A nominal current of 3 Arms and a 5-second peak output current of 9 Arms give this unit strong short-term overload capability and dependable servo response. Rated for 120 / 240 Vac 1~/3~ input, this drive is a very capable choice for straightforward motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-B00306-NAAN-I000 is a servo drive manufactured by Kollmorgen and belongs to the AKD Servo Drives series. This device conditions incoming AC mains power, modulates it through an IGBT bridge, and supplies controlled three-phase current to a matched servomotor. Within automated assembly cells, pick-and-place gantries, or indexing tables, it executes torque, velocity, and position commands issued by the main motion controller. Closed-loop regulation allows the axis to respond quickly to load changes while maintaining accurate commanded motion.
A nominal output of 3 Arms is the continuous phase current the drive can deliver without exceeding its thermal limits, while a short-term peak of 9 Arms for five seconds supports rapid acceleration or disturbance rejection. The power section accepts either single-phase or three-phase mains at 120 / 240 Vac 1~/3~, allowing the same hardware to be used in low-voltage and standard-voltage installations. With a rated apparent power of 1.2 kVA, branch circuit components can be sized for modest load requirements. For command interfacing, the unit uses an Analog command interface that converts ±10 V or 4–20 mA references into internal setpoints for the current, velocity, or position loops.
The regional configuration marked as Standard EU Italian sets language options and compliance labeling for that market. Classified as the Base drive version, it excludes optional safety or advanced motion modules and focuses on the core control functions needed for standard servo operation. No plug-in cards are installed, so the cabinet footprint remains consistent with the standard AKD width and the internal layout stays simple. Weighing only 1.1 kg, the unit imposes minimal load on slide-out panels or moving machine assemblies.
