AKT-DT-008-000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen AKT-DT-008-000 is a digital output module from the AKT IO Terminals series. It has 8 channels with LED indicators, each supporting a maximum output current of 0.5 A at a nominal 24 VDC. The module includes overload, short-circuit, and reverse voltage protection, and supports ohmic, inductive, and lamp loads.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKT-DT-008-000 digital output module is produced by Kollmorgen for the AKT IO Terminals series. Classified within the Advanced Kollmorgen Terminal portfolio, this component provides eight independently switched outputs that transfer control logic from a host controller to external actuators and signal devices used throughout automated equipment. It is intended for cabinet-based automation systems where compact I/O terminals pass controller commands to field devices such as relays, valves, and status indicators.
The device presents 8 channels that are rated for a nominal bus of 24 VDC. Each channel can source up to 0.5 A per channel, and the combined rail is limited to 3 A, allowing several loads to be energized at the same time without exceeding the internal power path. Typical contact current draw is 60 mA, which helps size upstream power supplies and protective elements. The outputs are designed for ohmic, inductive, and lamp loads, enabling connection to resistive heaters, solenoid coils, or indicator bulbs without additional interface hardware. Signal category is digital, and the module operates as a digital output, so each point switches only between logical high and low states rather than supplying proportional levels.
Internal consumption on the system bus is 18 mA typical, which minimizes aggregate current when multiple terminals are installed. A housing that meets the IP20 protection class shields the electronics from finger contact and basic debris while remaining suited to enclosed control cabinets. Diagnostic LEDs on the channel indicators show switching status and fault conditions in real time. Hardware safeguards include overload protection, short-circuit protection, and reverse-voltage protection. These features disconnect the output stage when abnormal current flow or wiring errors occur, helping prevent damage to both the terminal and connected field devices.
Frequently Asked Questions about AKT-DT-008-000:
Q: How many output channels are available on the AKT-DT-008-000 module?
A: The AKT-DT-008-000 provides 8 digital output channels for signal control.
Q: What is the maximum current output per channel on the AKT-DT-008-000?
A: Each channel can supply up to 0.5 A of output current.
Q: What is the nominal supply voltage of the AKT-DT-008-000 module?
A: The nominal voltage for this module is 24 VDC.
Q: What types of loads are compatible with the AKT-DT-008-000 digital output module?
A: The AKT-DT-008-000 supports ohmic, inductive, and lamp loads.
Q: What protections are included with the AKT-DT-008-000 digital output module?
A: Overload protection, short-circuit protection, and reverse voltage protection are standard features on this model.
