AKT-AN-200-000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
12 Seconds
The Kollmorgen AKT-AN-200-000 is an analog input module from the AKT IO Terminals series. It features a 2-channel thermocouple input signal type with a resolution of 0.1 degrees Celsius per digit and uses Two's Complement data encoding. The module has a standard-bus power supply, an IP20 protection class, and weighs 70 grams.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKT-AN-200-000 is an analog input terminal produced by Kollmorgen for the AKT IO Terminals series. Installed on the system backplane beside drive and logic modules, it captures temperature information from field sensors and forwards the numeric values to the controller image. This supports closed-loop thermal regulation in industrial automation lines where steady process temperatures matter. Because the readings are passed directly into the controller image, temperature trends can be evaluated in the same control cycle as drive and logic data.
This module accepts two independent sensor pairs, so it is a 2-channel device. Each channel is intended for a thermocouple input, and the wiring uses a simple 2-wire connection method to minimize cabinet space. Measured voltages are converted into binary words that use two's complement formatting, which allows the control program to handle negative temperature values without extra conversion steps. The A-to-D converter provides a resolution of 0.1 °C/digit, giving precise temperature discrimination for process control. Factory calibration uses a default gain of 160, which matches the microvolt input span of common thermocouple types to the numerical range of the terminal.
The electronics sit inside an IP20 housing, so the module must be mounted in a protected enclosure but does not need extra gasketing. With a mass of 70 g, the terminal adds little load to DIN-rail supports when many slices are installed in a compact control panel. Inside the process image, it occupies 2 x 16-bit data, allowing deterministic access to both temperature channels over the standard-bus power and communication backbone. The unit also includes internal mV measurement capability, and it omits any 24 V pass-through line. Configuration-free address assignment simplifies integration with adjacent modules on the backplane.
Frequently Asked Questions about AKT-AN-200-000:
Q: How many input channels are available on the AKT-AN-200-000 module?
A: The AKT-AN-200-000 provides two channels for analog input, allowing for dual thermocouple connections.
Q: What signal type does the AKT-AN-200-000 IO terminal accept?
A: The signal type accepted is thermocouple input, supporting precise temperature measurements.
Q: What is the resolution of the AKT-AN-200-000 IO terminal?
A: This module offers a high temperature resolution of 0.1 °C per digit, ensuring accurate temperature readings.
Q: What connection method does the AKT-AN-200-000 module use?
A: The AKT-AN-200-000 uses a 2-wire connection method for interfacing thermocouples or other compatible devices.
Q: What is the protection class rating of the AKT-AN-200-000 IO terminal?
A: With protection class IP20, the AKT-AN-200-000 is suitable for installation in environments without direct exposure to moisture or dust.
