ACS8011-330F01
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 83R09147A
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The ACS8011-330F01 drive unit supports 3-phase induction or PM synchronous motors, features CANopen communication, and operates within a temperature range of -40°C to +55°C. Part of the AC SuperDrive Motion Units by Kollmorgen, it offers IP65 protection, 1-4 quadrant control, and programmable hill hold functionality.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Kollmorgen ACS8011-330F01 motor controller is compatible with low-voltage asynchronous motors. This controller controls the motor in a battery-powered electric vehicle. The product may cause injury due to its high torque and high power levels if it is not handled properly. This device must be connected to a DC battery-powered source. The unit’s product label is located near its B+ terminal post on its cover. It offers operating efficiency with flux-vector control. This controller provides a reliable and safe networking system in the control system of the vehicle with its CAN bus interface.
The product’s heat-generating components are located on its finned heatsink. This device renders complete user control over speed, braking, and acceleration. The unit has a positive temperature coefficient resistance that limits the inrush current to several filter capacitors. It executes several checks to avoid its operation under unsafe conditions. This controller functions as a slave on a truck CAN network. The product features no environmental sealing and its cover protects it from particles dripping and liquids. This device’s installation should be done with 50 mm clearance above, before, and behind it. The unit cannot be oriented in the upside-down position. It is secured in place using at least two mounting brackets.
This motor controller has a flat profile and must be secured to the vehicle body only after applying grease uniformly on its surface. The product’s B+ and B- terminals are used for connection to the battery. This device needs to be fused against short circuits and internal faults. The unit is supplied with the battery voltage through the key start input. It has an isolated CAN bus interface.
Frequently Asked Questions about ACS8011-330F01:
Q: Why should the cooling fins at the bottom of the ACS8011-330F01 controller be kept clean?
A: The cooling fins at the bottom of the ACS8011-330F01 controller should be kept clean for its effective cooling.
Q: What is the tightening torque of the attaching bolts on the mounting brackets of the ACS8011-330F01 controller?
A: The tightening torque of the attaching bolts on the mounting brackets of the ACS8011-330F01 controller is 10 Nm +/-1 Nm.
Q: What tools are needed to mount the ACS8011-330F01 motor controller?
A: The tools needed to mount the ACS8011-330F01 motor controller are four bolts, four washers, two mounting brackets, and a box wrench.
Q: What kind of grease is applied on the surface of the ACS8011-330F01 controller before it is mounted?
A: Thermal grease like Dow Corning 340 or Electrolube HTC is applied on the surface of the ACS8011-330F01 controller before it is mounted.
Q: What is the function of the onboard fuse of the ACS8011-330F01 controller?
A: The onboard fuse of the ACS8011-330F01 controller protects it against short circuit.
