19.Z1.F04-1010 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The 19.Z1.F04-1010 is an EMC filter from the Z1 Sine Wave EMC Filters series manufactured by KEB. It is designed for three-phase systems with a nominal current of 60 Amps and supports a rated voltage of 400 VAC with a maximum voltage of 550 V. The filter measures 219 mm wide, 225 mm deep, and 121 mm high, with a total weight of 10.1 kg and a conductor size of 35 mm².
Internal Product Review
The 19.Z1.F04-1010 is a well-engineered sine wave EMC filter designed for 3-phase systems at 400 VAC. Clean output performance is supported by 60 A nominal current capacity and 0.2 mH inductance, making the unit a strong fit for drive applications. Compatibility across a 0-100 Hz range with 2 kHz switching frequency support makes this filter a dependable choice for controlled motor operation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 19.Z1.F04-1010 is a three-phase sine-wave electromagnetic compatibility filter manufactured by KEB for the Z1 Sine Wave EMC Filters series. Installed between a pulse-width-modulated drive and an AC motor, the device smooths the inverter’s output so the motor windings receive a near-sinusoidal voltage. By lowering common-mode noise and dv/dt, the filter limits electromagnetic emissions, reduces insulation stress, and permits longer motor cables in automation lines.
The magnetic core and winding set provide an inductance of 0.2 mH, a value selected to attenuate high-frequency harmonics while keeping fundamental voltage drop minimal. Under continuous duty, the filter conducts a nominal line current of 60 A, matching medium-power inverter outputs found on pumps, fans, and conveyors. Its insulation system is qualified for a rated line-to-line voltage of 400 VAC, while its clearance and creepage distances permit temporary excursions up to 550 V without dielectric breakdown. The design accommodates inverter carrier frequencies up to 2 kHz, ensuring the inductive reactance remains effective across the specified 0–100 Hz motor frequency range.
Thermal performance is characterized by a steady-state power loss of 67 W, so the enclosure must provide airflow or mounting surfaces that dissipate this heat. The filter’s input and output terminals accept conductors up to 35 mm², allowing low-resistance connections that keep junction temperatures within acceptable limits at full load. The housing measures 219 mm wide, 225 mm deep, and 130 mm high; the 219 mm width supports compact horizontal layouts in standard control enclosures. The overall assembly mass is 10.1 kg, with 2.6 kg attributed to copper, so additional mechanical support may be required for DIN-rail mounting on vibrating machinery.
