13.Z1.F04-1010 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 13.Z1.F04-1010 is part of the Z1 Sine Wave EMC Filters series and supports three phases with a nominal current of 12 Amps. This filter has an inductance of 1 mH, a maximum operating voltage of 550 V, and a rated voltage of 400 V AC. It measures 148 mm in base length by 78 mm in width, with a clamp height of 145 mm, and has a total weight of 2.5 kg.
Internal Product Review
The 13.Z1.F04-1010 is a KEB Z1 sine wave EMC filter built for three-phase 400 V AC drive systems. A 12 A nominal current and 1 mH inductance support clean waveform conditioning and dependable integration with motor applications. The 550 V maximum operating voltage makes the unit a strong choice for demanding inverter installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 13.Z1.F04-1010 sine-wave electromagnetic compatibility filter is produced by KEB within the Z1 Sine Wave EMC Filters series. The unit is installed between a pulse-width-modulated drive and a three-phase motor to smooth the voltage waveform and limit conducted emissions in automated production equipment. By restoring a near-sinusoidal supply, it reduces dielectric stress on motor insulation and helps meet plant EMC requirements. Its laminated core and 0.5 kg of copper conductors form a low-loss reactor that handles three phases without changing the drive’s control behavior. It also reduces acoustic noise caused by rapid voltage transitions in the stator and helps protect connected motor windings in demanding inverter-fed applications.
The filter operates at a rated line voltage of 400 V AC, yet its insulation system withstands peaks up to 550 V. It carries a nominal phase current of 12 A, and the wound core provides an inductance of 1 mH that suppresses high-frequency harmonics. The component is intended for inverter carrier frequencies around 2 kHz, so its attenuation behavior matches typical drive switching patterns. This operating range supports smoother voltage delivery from the inverter to the motor. These values set the electrical loading limits and help reduce dV/dt at the motor terminals during operation.
Internal dissipation is limited to 31 W, which helps keep cabinet heat buildup under control. The complete assembly weighs 2.5 kg and has a base length of 148 mm, allowing compact installation beside other control hardware. With a maximum output frequency of 100 Hz, the filter supports common variable-speed applications, including constant-torque operation above the standard 50/60 Hz range. Additional physical data include a base width of 78 mm, a clamp height of 145 mm, and terminals for 4 mm² conductors. These dimensions help with enclosure layout, cable routing, and spacing around adjacent components.
