13.Z1.C04-1000 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 13.Z1.C04-1000 is part of the Z1 Sine Wave EMC Filters series and has a current rating of 12.6 Amps with a rated voltage of 400 Volts. It features a rated power of 5.5 kW and an overload capacity of 150 percent for 60 seconds every 10 minutes. The product is rated IP20 for protection and weighs 13.4 kilograms.
Internal Product Review
The 13.Z1.C04-1000 is a KEB Z1 sine wave EMC filter rated for 5.5 kW at 400 V. IP20 protection and a 12.6 A current rating support dependable integration in controlled industrial panels. A 150% overload capacity for 60 seconds every 10 minutes is a strong advantage for variable-duty applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
KEB’s 13.Z1.C04-1000 is an EMC sine wave filter offered within the Z1 Sine Wave EMC Filters series. The component is a three-phase output filter installed between a variable-frequency drive and its motor. By converting the drive’s pulse-width-modulated waveform into a near-sinusoidal form, it protects motor insulation, reduces radiated emissions, and lowers bearing currents across automated conveyors, pumps, and general motion axes.
The filter is intended for three-phase networks operating at 400 V and a utility frequency of 50/60 Hz. Under nominal conditions it carries 12.6 A, and the internal inductance and capacitance are dimensioned for that current to keep the differential mode voltage within motor insulation limits. For temporary load spikes, it tolerates 150% for 60 s every 10 min, so mismatch during acceleration or regenerative events does not overheat the windings. The housing is rated IP20, allowing mounting inside a protected electrical cabinet with finger-safe terminals. Cable lugs up to 4 mm² can be landed on line and motor terminals, and a dedicated M6 PE stud bonds the core to the system ground.
During continuous service the filter handles drives up to 5.5 kW, and its laminated iron core generates a predictable dissipation of 130 W that must be removed by cabinet airflow. Its environmental endurance follows climatic class 3K3, defining allowable humidity and temperature fluctuations in control rooms without condensation. With a shipping mass of 13.4 kg, panel designers must account for mechanical support and vibration limits when positioning the unit near the inverter. The PE connection geometry and the 4 mm² line terminals simplify low-impedance wiring, minimizing emitted differential and common-mode noise at the motor leads.
