Product Description:

The B3.F5.S1D-24E0 is an AC drive module produced by KEB for the F5 Combivert Axis Drives series. In automation cabinets, it conditions line power and generates variable voltage and frequency output for the connected motor. It also links motion commands between a PLC and a single axis, enabling controlled speed and torque in compact systems.

The drive accepts 1/3-Ph 230 V AC/DC input power. A front-mounted D-Sub 15-Pole connector handles control connections, while a rear D-Sub 9-Pole plug carries motor feedback or digital I/O signals. Its internal circuitry can command shaft speeds up to 4000 rpm, and the integrated GTR 7 braking transistor dissipates regenerative energy during deceleration in most duty cycles. No encoder feedback card is installed, so higher-resolution position control depends on other feedback methods when tighter regulation is required.

Thermal management relies on Self-Cooling, so heat leaves the heat sink without fan assistance and cabinet airflow demands remain lower. The auxiliary X3b port provides a dedicated 24 V rail rated at 170 mA Max for sensors and a separate 5 V rail rated at 500 mA Max for logic electronics. Command and diagnostic signals on this header use the RS422 Line Driver standard, which supports differential transmission over longer cable runs with reduced noise sensitivity.

Wake Industrial stocks this model for replacement and new-build needs across urgent maintenance outages and planned retrofit schedules. Each unit includes a 1-year warranty. Same-day shipping can be arranged when schedules are tight and downtime must be minimized during critical repairs onsite.