34.F5.A1P-B0-D KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 34.F5.A1P-B0-D axis drive is part of the F5 Combivert Axis Drives series and features a rated power of 500 kW. It supports a rated input voltage of 690 V AC, a maximum current of 688 A, and operates with a 3-phase input. This drive has an IP20 enclosure, includes a braking transistor, and measures 960 mm in height, 340 mm in width, and 454 mm in depth.
Internal Product Review
The 34.F5.A1P-B0-D is a KEB Combivert F5 axis drive designed for high-demand motion systems, with 690 V AC rated input voltage and 500 kW rated power. IP20 enclosure protection and 3-phase input make this unit well suited for controlled industrial cabinet installations. The integrated braking transistor adds practical control value, and the 688 A maximum current highlights the drive’s high-capacity performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 34.F5.A1P-B0-D is an AC axis drive module manufactured by KEB for the F5 Combivert Axis Drives series. It regulates the speed and torque of large three-phase induction or synchronous motors used in presses, winders, and high-horsepower conveyor lines. By controlling the inverter bridge and switching devices, the unit converts a fixed industrial supply into a variable-frequency output that responds to real-time process requirements. This control method supports changes in motor speed and torque while the connected machinery is operating.
The drive operates from a three-phase supply of 690 V AC and produces up to 500 kW of mechanical power at the motor shaft. The line conductors carry a rated current of 550 A, while transient loads can draw up to 688 A without exceeding the semiconductor limits. Its enclosure has an IP20 rating, so the drive must be installed inside a switchgear cabinet with suitable ventilation and protection from moisture. Internal logic runs on a Standard control board, and the gating devices have a rated switching frequency of 2 kHz. A preinstalled braking transistor helps dissipate regenerated energy returned by the motor during deceleration. The incremental encoder port accepts TTL feedback through a Sub-D connector, and a separate TTL auxiliary output provides the signal to diagnostic or control equipment. A dedicated input phase monitor verifies the required power source before operation. Housing code P corresponds to the two-slot “2 × P” module arrangement supplied for this drive.
The housing has an overall height of 960 mm, a depth of 454 mm, and a width of 340 mm. These measurements provide the cabinet clearance information needed for mounting, cable routing, and ventilation around the power section. The inverter can switch at up to 4 kHz when the application requires finer current control and a faster response to changing loads. Storage is permitted at ambient temperatures from -25 °C to 70 °C, allowing the unpowered unit to remain in warehouses or transit areas without climate control. The coded housing channels align the module with adjacent drive shelves, while the auxiliary board allows the encoder signal to be observed by a PLC, counter, or oscilloscope.
