27.F5.AAU-YVG0 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 27.F5.AAU-YVG0 is part of the F5 Combivert Axis Drives series and comes with a standard control board and IP20 protection. Rated for 160 kW motor power and 208 kVA apparent power, it operates with a rated input current of 330 Amps and an output current of 300 Amps at 400 volts. The drive supports up to 3 input phases and is designed for installation at altitudes up to 2000 meters.
Internal Product Review
The 27.F5.AAU-YVG0 is a KEB F5 Combivert axis drive well suited for high-capacity motion applications, with 160 kW rated motor power and 208 kVA rated apparent power. IP20 protection supports straightforward cabinet integration, and the 300 A rated output current stands out for demanding axis-drive service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 27.F5.AAU-YVG0 is an axis drive module produced by KEB for the F5 Combivert Axis Drives series. This unit functions as a power stage that regulates the speed and torque of three-phase motors in automated machinery. It is equipped with a Standard Board control section and comes without an encoder feedback card or internal option cards, so it is intended for basic velocity and torque loops controlled by an external system. A U-coded housing form factor allows the drive to slide into a standard F5 rack, and the housing is intended for installation inside a control cabinet where forced air helps keep contaminants away from live parts.
The drive provides a rated apparent power of 208 kVA, drawing a three-phase input current of 330 A at 400 V and supplying the motor section with a rated output current of 300 A. Under these conditions, the connected machine can receive continuous mechanical output of 160 kW. Cabinet protection can be arranged with a 450 A mains fuse, while the electronic overcurrent trip monitors a 450 A threshold to protect the semiconductors. The enclosure has an IP20 protection class, which guards against contact with larger solid objects but requires the surrounding cabinet to manage water ingress and airflow.
Thermal management is based on a heat-sink limit of 90 °C, so cooling air must keep the baseplate below that temperature to maintain rated current and normal semiconductor life. Motor leads may be routed through shielded cable runs up to 50 m, which supports installation in larger cabinets or along nearby machine sections. The unit is intended for installation sites up to 2000 m altitude, and higher elevations require derating because lower air density reduces cooling effectiveness. Short-term overload capability is available for start-up or rapid acceleration, and all operating data assume a three-phase supply within the stated operating conditions.
