24.F5.C0R-940A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 24.F5.C0R-940A is part of the F5 Combivert Axis Drives series and is a compact control device with standard varnished cooling. This model operates at 400 V AC/DC with three input phases and supports a maximum motor power of 125 HP. The drive offers a rated current of 180 A and a maximum current of 324 A, with maximal short-time current at 150 percent.
Internal Product Review
The 24.F5.C0R-940A is a KEB F5 Combivert axis drive built with compact control architecture and EMC Class C1 compliance. Rated current of 180 A and maximum current of 324 A support confident performance in demanding motion applications. A maximum motor power of 125 HP makes the unit a strong choice for higher-capacity axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 24.F5.C0R-940A belongs to the F5 Combivert Axis Drives series produced by KEB. As a compact axis drive, it interfaces directly with industrial control systems to modulate the torque and speed of large AC motors used in automated lines, conveyors, or pumps. It converts a fixed mains supply into variable frequency and voltage output so the connected motor can follow precise velocity commands during manufacturing processes. This type of control helps equipment maintain stable motion during starts, stops, and load changes. It can be used where process speed must be adjusted smoothly instead of running a motor at full line frequency all the time.
This model delivers a continuous output of 180 A and can reach 324 A during momentary peaks. Short bursts are further supported by a short-time current margin of 150%, which helps the drive handle temporary demand increases. Power devices inside the inverter switch up to 8 kHz, while the default carrier is set at 2 kHz; these settings influence motor acoustics and thermal loading. The unit uses a compact control design, has a standard varnish coating for component protection, and omits an internal encoder interface, so external feedback is required for closed-loop positioning. Housing form factor R and inverter size code 24 indicate the physical frame and mounting pattern used for cabinet installation.
The drive supports motors up to 125 HP, and this rating also applies at 480 V for Unit D installations. It is designed for 400 V AC/DC networks and accepts a 3-phase supply, matching common industrial power systems. Compliance with EMC Class C1 limits conducted emissions so the unit can be installed near sensitive instrumentation. This arrangement is suitable for high-power applications where available panel space is limited and controlled electrical noise is important.
