22.F5.E0R-Y000 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 22.F5.E0R-Y000 is an axis drive from the F5 Combivert Axis Drives series, featuring an IP20 enclosure and standard cooling. It supports a maximum motor power of 75 HP at 480V, with a general input voltage class of 400 V and a maximum short-time current rated at 125% of nominal. The drive has a width of 340 mm, depth of 355 mm, and height of 520 mm.
Internal Product Review
The 22.F5.E0R-Y000 is a KEB Combivert F5 axis drive rated for 400 V input systems and up to 75 HP motor power. An IP20 enclosure and standard cooling support dependable cabinet integration in controlled industrial environments. The 2 kHz switching frequency is a strong asset for stable high-power axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 22.F5.E0R-Y000 is an AC axis drive produced by KEB within the F5 Combivert Axis Drives series. Acting as the power stage between a plant’s three-phase supply and its induction or synchronous motor, the unit modulates voltage and frequency so that speed and torque follow the machine controller’s commands. It is intended for midrange conveyor, pump, and process lines where coordinated motion and energy efficiency are important. The drive can regulate motor operation across changing process demands while receiving commands from the machine control system.
This inverter is designed for a nominal mains connection of 400 V, giving it direct compatibility with common European industrial power grids. When operated on that supply, it can deliver up to 75 HP of mechanical power. The control system permits short bursts at 125% of rated current to overcome inertia during acceleration. A further protection threshold trips the drive at 150% of rated current, preventing semiconductor overload if a jam or stall occurs. Pulse-width modulation is generated at a switching frequency of 2 kHz, balancing acoustic noise, motor heating, and drive efficiency. No encoder feedback card is installed, so speed regulation relies on the unit’s open-loop sensorless algorithms or an external speed transducer connected to the controller.
The housing has a rectangular footprint that is 355 mm deep, 520 mm high, and 340 mm wide, allowing adequate cabinet space for airflow and cable bends. Its housing code is R, and the size code is 22. An IP20 enclosure shields the internal electronics from accidental finger contact but requires installation inside a closed control panel. Standard cooling uses integral fans to draw air through the heat sink without liquid cooling or ducted assistance. The shared size code places the model among drives with matching mounting points and busbar positions, which supports orderly installation in parallel drive arrays.
