20.F5.C0R-760A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 20.F5.C0R-760A is part of the F5 Combivert Axis Drives series and has a general maximum motor power rating of 50 HP. It is equipped with 8 digital and 2 analog inputs, supports a rated current of 145 Amps, and features an IP20 enclosure. The drive operates with a three-phase 230 V AC supply and has a rated switching frequency of 8 kHz.
Internal Product Review
The 20.F5.C0R-760A is a KEB F5 Combivert axis drive designed for high-demand motion applications on 3-phase 230 V AC supply. Rated output at 145 A with 261 A maximum current gives the drive strong overload handling and confident motor control. A 2 ms I/O scan time and IP20 enclosure make this model a very capable choice for responsive cabinet-mounted installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 20.F5.C0R-760A is an AC axis drive manufactured by KEB within the F5 Combivert Axis Drives series. The unit converts fixed-frequency mains power into the variable output required for induction or synchronous motors used in conveyors, winders, or positioning modules. It provides speed control, torque control, and dynamic braking so machine controllers can synchronize motion across multiple axes and respond to real-time load changes in industrial automation cells.
On the power side, the inverter is rated for a continuous output of 145 A, while it can supply up to 261 A during quick acceleration or overload recovery. These current limits align with a maximum motor shaft rating of 50 hp, allowing the same frame to handle medium-sized pumps or extruders powered from a three-phase 230 V AC supply. The internal IGBT bridge switches at 8 kHz, a frequency high enough to reduce motor acoustic noise and let the vector control algorithm generate fine voltage steps. The controller samples current feedback against these switching events, helping it keep stator currents within tolerance across the full speed range.
For cabinet integration, the housing carries an IP20 rating, which provides protection against accidental finger contact when the unit is mounted inside an enclosed panel. Control wiring is terminated on 29 spring-clamp terminals that include eight digital inputs, two transistor outputs, and two relay contacts. Two analog channels accept command or feedback signals and are digitized with 12-bit resolution for precise setpoint handling, while two analog outputs broadcast real-time status to external meters or PLC analog cards. The microprocessor completes every I/O update and parameter check within 2 ms, a scan time that supports fast torque loops and allows the drive to store and switch among eight independent parameter sets without disrupting motion.
